状态转移单独一个模块，状态操作、判断写一个模块。

初始化状态和默认状态：完备状态机，能自恢复。

所有输出最好有寄存器打一拍。

以下是Altera的一个设计范例，功能是读ROM

`timescale 1 ps / 1 ps

module read_control_logic
(
 input clk_i, reset_i, rdempty_i,
 input [31:0] data_i,
 output reg rdreq_o, wren_o, rden_o,
 output reg [7:0] addr_o,
 output [31:0] data_o,
 output reg [8:0] word_count_o
);
 
 reg [1:0] state;

 // Declare states
 parameter IDLE = 0, INCADR = 1, WRITE = 2, WAIT = 3;
 parameter RAM_DEPTH = 255;
 parameter FIFO_DEPTH = 64;
 
 assign data_o = data_i;

 // Output depends only on the state
 always @ (state ) begin
  case (state )
   IDLE:
   begin
    rdreq_o = 1'b0;
    wren_o = 1'b0;
    rden_o = 1'b0;         
   end
   INCADR:
   begin
    rdreq_o = 1'b1;
    wren_o = 1'b0;    
    rden_o = 1'b0;             
   end
   WRITE:
   begin 
    rdreq_o = 1'b0;
    wren_o = 1'b1;       
    rden_o = 1'b1;         
   end
   WAIT:
   begin
    rdreq_o = 1'b0;
    wren_o = 1'b0;    
    rden_o = 1'b0;             
   end
   default:
   begin
    rdreq_o = 1'b0;
    wren_o = 1'b0;    
    rden_o = 1'b0;             
   end
  endcase
 end

 always @ (posedge clk_i or posedge reset_i) begin
  if (reset_i)
  begin
   state  <= IDLE;
   addr_o <= 8'hff;
   word_count_o <= 9'h0;
  end
  else
   case (state)
      
    IDLE:
    begin
     if(!rdempty_i)
     begin
      state  <= INCADR;
      addr_o <= addr_o + 8'h01;
     end
     else
     begin
      state  <= IDLE;
      addr_o <= 8'hff;
      word_count_o <= 9'h0;
     end
    end
    
    INCADR:
    begin
     state  <= WRITE;
     word_count_o <= word_count_o + 9'h1;
        end
       
    WRITE:
    begin
     if(rdempty_i)
      state  <= WAIT;
     else
      begin
       state  <= INCADR;
       addr_o <= addr_o + 8'h01;
      end
    end
      
    WAIT:
    begin
     if(!rdempty_i)
     begin 
      state  <= INCADR;
      addr_o <= addr_o + 8'h01;
     end
     else
      state  <= WAIT;
    end
    default:
    begin
     state  <= IDLE;
     addr_o <= 8'hff;
     word_count_o <= 9'h0;
    end
   endcase
 end

endmodule

*博客内容为网友个人发布，仅代表博主个人观点，如有侵权请联系工作人员删除。